Honeywell Truesteam Water Level Sensor Recall. • if fault returns, replace the unit. All for less than the sensor itself costs everywhere else and much easier to order.
Honeywell 50027998002 Humidifier Water Level Sensor from www.climatedoctors.com
Yeah, according to my install manual here; • reassemble tank and press the reset button. If you turn the humidifier off for a couple days it will dry out and work again, which is what i've been doing the past couple years without knowing why it was recovering.
It May Or May Not Be Available On Customer.resideo.com.
• if fault returns, replace the unit. Defective 001 part by s. Find equivalent or replacement products.
I Uploaded Some Pictures Of The Sensor I Removed So You Can Compare Yours If You Would Like Before Buying A New One.
Easy install and working great much better desgin than the original, which honeywell failed to recall. Includes the sensor, wire harness, 2 gaskets, retaining clip and screw. We have installed maybe 50.
Includes The Sensor, Wire Harness, 2 Gaskets, Retaining Clip And Screw.
4) disconnect, remove & replace the water level sensor. So over here in southwestern ontario we pushed the honeywell true steam humidifiers. • check water sensor connection to electronic board.
As Far As That Leaky Water Line , Close The Water, Take Needle Nose To Puch Up On That Connector Ring Where The Impeline Water Line Goes Into The Water Valve, And As You Puch Up Hard On Each.
Customer calls regarding the fault code, you get there, remove the sensor and find it cracked all over the place. You may have a defective water valve / or a bad water level sensor, call honeywell ( if new) and they will probably ship one overnight. We enjoy providing the midwest with the highest quality auto body products on the market.
Check The Drain Hose To See If Water Is Leaking Through The Hose.
• reattach cover and plug truesteam in. Honeywell has released a service bulletin regarding cracks on the water level sensor assembly. Yeah, according to my install manual here;
